Comments on: Programming ATmega8 http://www.randity.com/blog/2009/07/programming-atmega8/ tips, tricks and random musings Sun, 07 Aug 2011 04:03:01 +0000 hourly 1 http://wordpress.org/?v=3.2.1 By: Jaan http://www.randity.com/blog/2009/07/programming-atmega8/comment-page-1/#comment-1983 Jaan Sun, 21 Mar 2010 12:03:06 +0000 http://www.randity.com/blog/?p=122#comment-1983 I searched with Yahoo! "Programming the AVR microcontroller with GCC", then opened 2nd link and "A small test project". The Reset pin is wired differently and this change worked for me. I searched with Yahoo! “Programming the AVR microcontroller with GCC”, then opened 2nd link and “A small test project”. The Reset pin is wired differently and this change worked for me.

]]> By: Rahul Pisharody http://www.randity.com/blog/2009/07/programming-atmega8/comment-page-1/#comment-1981 Rahul Pisharody Sun, 21 Mar 2010 11:44:18 +0000 http://www.randity.com/blog/?p=122#comment-1981 Jaan, That is strange. I’m pretty sure I wired up the circuit exactly as shown in the schematic. Let me confirm it. BTW, congratulations on making it work Jaan,
That is strange. I’m pretty sure I wired up the circuit exactly as shown in the schematic. Let me confirm it. BTW, congratulations on making it work

]]> By: Jaan http://www.randity.com/blog/2009/07/programming-atmega8/comment-page-1/#comment-1978 Jaan Sun, 21 Mar 2010 11:37:09 +0000 http://www.randity.com/blog/?p=122#comment-1978 The circuit seems to have one mistake. I put the 10K between Vcc and Atmega8 Reset, but parallel port pin 16 has to be wired to Atmega8 reset, not to Vcc directly. That how I got this circuit working. The circuit seems to have one mistake. I put the 10K between Vcc and Atmega8 Reset, but parallel port pin 16 has to be wired to Atmega8 reset, not to Vcc directly. That how I got this circuit working.

]]> By: HopsOpegips http://www.randity.com/blog/2009/07/programming-atmega8/comment-page-1/#comment-1507 HopsOpegips Wed, 03 Feb 2010 19:17:10 +0000 http://www.randity.com/blog/?p=122#comment-1507 Stunning, I did not heard about this topic up to the present. Thanks. Stunning, I did not heard about this topic up to the present. Thanks.

]]>